sales@jonaled.com
For Technical and Online Support: 7065710710 (10AM- 5PM), 9711126055, 9212246055
sales@jonaled.com
For Technical and Online Support: 7065710710 (10AM- 5PM), 9711126055, 9212246055
The first priority of Jona LED is to provide best quality to its consumers with full satisfaction. Selling an LED without accessories is just like moving ahead without any planning and direction. It is therefore our first priority is to provide adequate support to our clients and keeping all the accessories in stock. We are offering a comprehensive range of LED Display Accessories all of which have been hailed for their superior performance and exceptional lifespan.
The Sending Card is required to send the signal from the computer to the LED displays through CAT 5 or CAT6 Cable.You can choose the sending card of NOVA, LINSN etc.
The Receiving Card is required to receive the signal from the Sending card to the LED displays.You can choose the sending card of NOVA, LIN SUN etc.
Hub cards are the equipments which are basically used for the purpose of installation in the LED Screen control systems for illuminating wider areas. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports.
The Sender box is required to send the signal from the computer to the LED displays with the help of CAT 5 or CAT 6 Cable. Through sender box you can control the LED screen by Laptop, Can save the data by USB/ Pen drive and also can control your screen by Wi-Fi function.
In software, A Led module is a part of a Cabinet. Cabinets are composed of one or more independently developed modules. A single module can contain one or several routines. You can easily change module if any problem occurs.
A power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another and, as a result, power supplies are sometimes referred to as electric power converters.
Cables are used for a wide range of purposes, and each must be tailored for that purpose. Cables are used extensively in electronic devices for power and signal circuits.
Connectors consist of plugs (male-ended) and jacks (female-ended). The connection may be temporary or serve as a permanent electrical joint between two wires or devices.An adapter can be used to effectively bring together dissimilar connectors.
A mask is an object normally used for protection. Mask protects the LED bulbs from moisture or dust. It is mostly used for safety purpose. We provide high quality MASK which is Dark & flexible.
Flight case is a shipping container specifically built to protect LED Cabinets during the transporting. We used 12mm plywood made material with Heavy Duty wheel quality. It makes safe your led screen during moving to one place to another.
Bulbs are the main building block of led screen. It can be DIP or SMD as per requirement. In DIP, RGB bulbs are separate. SMD is advanced and all three put together into single bulb to provide more picture clarity. DIP is still used in large pixel LEDs.
Cabinet Locks are used to cascade cabinets with each other. The lock can be screw based or L-Push pattern. The grip must be fine to enhance the life and security of cabinet. The batter quality locks provide safety while hanging the wall or making huge screen in events.
P2mm
